As you can see from the picture above, the tool makes it easier to.

Removing The Dust Cup For Cleaning.You can also fully remove the dust cup for cleaning.

You won’t need to do this every time you empty the vacuum, but it’s a good idea to clean the cup whenever there is visible dirt or dust..Turn off the power, empty the vacuum, and leave the bin hinged downwards.. Slide forward the filter housing to remove it.. Press the orange release tab on the bin and simultaneously pull the cup away from the vacuum.. Handwash the vacuum bin with lukewarm water (do not use any detergents or cleaning products)..Allow the bin to dry fully before reinserting it into the vacuum..

Replace the bin by sliding it into the bottom of the nozzle.There will be a click once it’s in position.. 4.

Finally, hinge the bin back into position until it clicks into place.

Your Shark WV200UK is now ready to use again!.These are angled towards the centre of the floorhead.. As hair spins around the brush, the vanes migrate the fibres along the bar and into the bin, rather than it getting caught around the brush..

Make sure you check the vacuum you’re buying contains a floorhead with detangling technology.Some shops are still selling old stock, which may not include the newer floorhead..

Does It Really Work?.At the time of writing this article, we’ve been.